Laurin Metalli -carving-84-stainless

Lauri-carving-84-stainless; (84×17/15×3.25mm), has a slight taper, which I think makes the blade a bit more graceful. The blade is about 3 5/16″ long, 5/8″ wide at the base, and.130″ thick. The tang is about 4 3/8″ long.

Best Bolsters/Ferrules Below

Link to 15x22x3 Shaped – Smallest possible bolster to fit this blade

Link to 16x24x3 Shaped – Average sized Bolster

Link to 15x23x13 Shaped Ferrule – For those that like Ferrules

Link to 18x28x3 Shaped – Very Popular for this blade

Link to 19x30x3 Shaped – Most common, Can be ground down to a decent sized finger guard

Link to 18x35x3 Shaped – Best for those that like a long distinct finger guard